Product Data Sheet    

ATD1000CRP


Adaptive Technology Dual (Ultrasonic and PIR) Ceiling Sensors
Hubbell ATD series sensors incorporate both ultrasonic and passive infrared detection technologies. These dual technology sensors provide the most reliable means of automatic lighting control. Common applications include open office spaces, conference rooms, classrooms, and executive offices where flawless performance is necessary. An isolated relay and photocell are included on models with “RP” suffix. A CU series control unit is required for use with ATD series sensors.

Hubbell Wiring Device-Kellems Product Specifications
 Product  Indoor Sensor
 Application  Ceiling
 Sensing Technology  Dual (Ultrasonic and Passive Infrared)
 Coverage Area  1000 Sq. Ft.
 Adaptive  Yes
 Color  
 Photocell & Isolated Relay  Yes
 Agency Approvals  UL listed
 Power Requirements  24V DC Nominal, 33mA from Hubbell CU Series Control Unit
 Isolated Relay  Normally open and normally closed terminals available
 Lens Material  Polyethylene
 Dimensions  4.5" diameter, 1.5" height
 Housing Material  Flame retardant UL 94 V-0 ABS
 Operating Temperature  32° F to 104° F (0° C to 40° C) with rate of change not exceeding 20° F (11° C) per hour
 Operating Humidity  0% to 95% noncondensing relative humidity
 Storage Temperature  -20° F to 150° F (-29° C to 65° C)
 Storage Humidity  0% to 95% noncondensing relative humidity
 Time Delay  Test (8 seconds), Adaptive 8 to 40 minutes
 Ambient Light  1 to 1,000 foot candles
 Sensitivity  Adaptive 0 to 100%
 Ultrasonic Sensing Indicator  Green LED
 Passive Infrared Sensing Indicator  Red LED
 Mounting Height  8 to 12 ft.












 

Hubbell Wiring Device-Kellems