AAR
|
|
AAR Add-A-Relay Hubbell AAR Add-A-Relay is designed for use with Hubbell CU series control units and Hubbell ATD, ATU, ATP, and PIR series ceiling and wall mount occupancy sensors. The AAR contains an internal relay for control of an external lighting load. The AAR requires a 24V DC power supply from the Hubbell CU series control unit. The AAR is typically used when: 1) It is desired to switch more than one circuit when occupancy is sensed. 2) The lighting load exceeds the maximum rating of the control unit. |
| Hubbell Wiring Device-Kellems Product Specifications | |
|---|---|
| Product | Add-A-Relay |
| Color |  |
| Agency Approvals | UL listed |
| Power Requirements | 24V DC Nominal, 33mA from Hubbell CU Series Control Unit |
| Dimensions | 3.69"L x 2.33"W x 1.36"H |
| Housing Material | Flame Retardant UL 94-5V Plastic |
| Operating Temperature | 32° F to 104° F (0° C to 40° C) |
| Operating Humidity | 0% to 90% noncondensing relative humidity |
| Storage Temperature | -20° F to 150° F (-29° C to 65° C) |
| Storage Humidity | 0% to 90% noncondensing relative humidity |
| Incandescent Load Capacity | 0 to 1800 watts |
| 120V Ballast Load Capacity | 0 to 2400 watts |
| 230V Ballast Load Capacity | 0 to 3680 watts |
| 277V Ballast Load Capacity | 0 to 5540 watts |
| 347V Ballast Load Capacity | 0 to 5205 watts |
 |
